WARNING! If you use the following guide in any way, you do so at your own risk. Although we make every effort to make our guides as accurate as possible we cannot guarantee that they 100% correct. TorqueVW™ cannot be held liable for faults or third party injury caused by using this guide. If you do not feel confident carrying out the following work get a professional to do it.




Open the boot and pull away any carpet etc to reveal the plastic cover.

 

The cover is held in place by two clips either side as marked opposite.

 

Squeeze these clips together and pull towards the front of the car.

 

Now lay the cover down on the boot floor.

 

 

 



The tail light is held in place by three bolts as marked opposite. Undo all three blots and keep safe.

 

 

 



The tail light is now ready to be removed. Pull the tail light gently off towards the back of the car.

 

You have now removed the tail light.

 

To install do steps in reverse.

 

 

 

 

 

Talk on the forum






 
Written by Will Charles, Photography by Will Charles


How to guides

Corrado - Removing headlights new

Easy 10/15 mins

Corrado Pre 91- Removing doorcards new

Easy 20/30 mins


 

Copyright © 2005 TorqueVW - All rights reserved

Volkswagen is a registered trademark of Volkswagen AG.
TorqueVW is an independent media publication and is not affiliated with or endorsed by Volkswagen AG or Volkswagen of America, Inc.